1550 Cobb Industrial Dr. | P.O. Box 9098 | Marietta, GA 30065-2098
770-425-1355 (Phone) | 770-425-1354 (Fax) | info@alliedcorrosion.com (Email)
©2018 Allied Corrosion. All rights Reserved.
Made with ❤ by Mighty Good Marketing
DeFelsko Standards Certified Polystyrene Blocks
Certified Polystyrene Blocks
Certified Polystyrene Blocks are for use with gages that measure over 1500 μm (60 mils).They have an accuracy of:
± (2.5 ?m + 0.05% of thickness)
± (0.1 mil + 0.05% of thickness)
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
| Order Code |
Ideal for | Approximate Thickness | Coating Substrate |
Accuracy | |||
|---|---|---|---|---|---|---|---|
| Plate 1 | Plate 2 | Plate 3 | Plate 4 | ||||
| P1 | PosiTector® 6000 FT, FTS, NTS, FNTS |
375 μm 15 mils |
2 mm 2 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
Polystyrene Blocks |
± 2.5 μm + 0.05% of thickness |
| P2 | PosiTector® 6000 FHS, NHS, EOC |
2.5 mm 100 mils |
6.5 mm 250 mils |
13 mm 500 mils |
19 mm 750 mils |
||
| P3 | PosiTector® 100 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
||
| P4 | PosiTector® 100 D | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
||
| P5 | PosiTector® 6000 FKS, NKS | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
12 mm 480 mils |
||
| P6 | PosiTector® 200 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
3 mm 125 mils |
||
| Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB. Polystyrene Block Dimensions: 38 X 70 mm (1.5 X 2.75 inch) |
|||||||
Other Similar Products
Related products
-
- Pro-Mark Supply, Testing Equipment, Reference Electrodes and Test Stations
Pro-Mark Test Stations
- Add To Quote tr This product has multiple variants. The options may be chosen on the product page
Learn About Our Services
Learn about our
pipeline integrity
Services
Learn about our
cathodic protection
Engineering Services
Learn about our
A/C Mitigation
Engineering Services
Learn about our
field services
Learn about our
surveying services