1550 Cobb Industrial Dr. | P.O. Box 9098 | Marietta, GA 30065-2098
770-425-1355 (Phone) | 770-425-1354 (Fax) | info@alliedcorrosion.com (Email)
©2018 Allied Corrosion. All rights Reserved.
Made with ❤ by Mighty Good Marketing
Line Markers
| Durability Tinker & Rasor MARKS-A-Lines are made of ultraviolet-stabilized High Density Polyethylene (HDPE) to inhibit fading and warping from exposure to the elements. And unlike painted metal signs, they will not absorb water, peel, or rust. MARKS-A-Line samples were tested by an independent testing laboratory according to the procedures in Federal (Military) Test Standard 191A, Method 5804, “Accelerated Severe Weathering Test.” As a result of these tests, Tinker & Rasor offers a limited 25-year warranty on the MARKS-A-Line product line.
|
 |
| Non-Metallic Construction The HDPE construction is non-conductive and will not spark when struck. This eliminates the possibility of spark ignition, fire or explosion in hazardous combustible locations.
|
 |
| Wind Resistance The tubular configuration makes the Tinker & Rasor MARKS-A-Line less susceptible to “windwhip” – a common problem with 2-dimensional metal signs and other flat markers which have a large “footprint” in the wind.
|
 |
| High Visibility MARKS-A-Line fittings are available in vivid colors selected to stand out in any background environment. Its 3-1/2″ OD tubular design is highly visible from any angle as well as from the air. Optional fluorescent fittings increase visibility from any sight plane. Text messages are hot-stamped for durability into the fittings, not screen-printed or stenciled.
|
 |
| Virtually No Maintenance Because MARKS-A-Lines require no maintenance, their purchase assures low cost over the life of the installation.
|
|
| MARKS-A-Line Main Functions Indicates the location of a buried pipeline, cable, conduit, etc. Helps construction crews avoid accidentally damaging buried utilities and pipelines. Warns the general public that there is a buried pipeline or utility in the area. Identifies the owner. Test Stations are used to monitor the effectiveness of cathodic protection programs.
|
 |
Other Similar Products
Related products
Learn About Our Services
Learn about our
pipeline integrity
Services
Learn about our
cathodic protection
Engineering Services
Learn about our
A/C Mitigation
Engineering Services
Learn about our
field services
Learn about our
surveying services