1550 Cobb Industrial Dr. | P.O. Box 9098 | Marietta, GA 30065-2098
770-425-1355 (Phone) | 770-425-1354 (Fax) | info@alliedcorrosion.com (Email)
©2018 Allied Corrosion. All rights Reserved.
Made with ❤ by Mighty Good Marketing
Selected:
4-pin soil resistivity test reel Cat. #44700 |
Wire reel with four color-coded lead wires. Standard lead lengths provide for 20 ft. maximum pin spacing. Custom lead lengths are available.
|
---|---|
4-pin soil test reel leads Cat. #44695 |
The color-coded 4-Pin Test Set has been designed and engineered to be used in conjunction with any one of MCM’s multi-combination family of meters, the Nilsson 400 soil resistance meter or similar-four terminal soil test instruments.
|
Soil pins Cat. #44720 |
Four 3/8 inch diameter stainless steel T-handle 18 inch soil pins. Replacement pins sold individually.
|
Soil pins Cat. #44710 |
Four 5/16 inch diameter stainless steel T-handle 18 inch soil pins. Replacement pins sold individually.
|
Soil pins Cat. #44701 |
Four 1/4 inch diameter copper 20 inch soil pins. Replacement pins sold individually.
|
Soil pins Cat. #44707 |
Four 1/4 inch diameter stainless steel 20 inch soil pins. Replacement pins sold individually.
|
The M. C. Miller Co., Inc. 4-Pin Test Set has been designed and engineered to be used in conjunction with any one of MCM’s multi-combination family of meters, the Miller 400A soil resistance meter or similar-four terminal soil test instruments.
The test setup utilizes the mechanics of the “Four-Electrode Method,” which was developed by the National Bureau of Standards and commonly known as the Wenner 4-Pin Method. The resultant resistivity is the average resistivity of the soil (electrolyte) to a depth equal to the spacing between adjacent electrodes (soil pins). The maximum depth (pin spacing) of this standard test set has been designed for 20 feet, which is recommended for standard survey.
The Soil Resistivity Reel is made up of four (4) separate, color coded, lead wires of: 5 foot (yellow), 25 foot (orange), 45 foot (red) and 65 foot (black) lengths. Lead wires are harnessed together and mounted on a lightweight handheld reel. Wire ends at the reel are affixed to female banana plug jacks (mounted in the center hub area), while the opposite ends are terminated with Mueller 27-C clips. Two-foot, color-coded jumper leads with banana plug ends are supplied with the soil resistivity reel to facilitate connection between the Reel and your test meter.
All lead wires and jumpers are made of our own No. 16 AWG, 105 strand copper wire with PVC insulation. In addition to our color-coding of the wires, all ends are clearly labeled as to their connection point.
1550 Cobb Industrial Dr. | P.O. Box 9098 | Marietta, GA 30065-2098
770-425-1355 (Phone) | 770-425-1354 (Fax) | info@alliedcorrosion.com (Email)
Made with ❤ by Mighty Good Marketing
We care about your privacy! In order to run a successful website, we are setting cookies and accessing and storing information on your device for various purposes. By continuing to browse this site, you are agreeing to our use of cookies.
If you wish to disable cookies, please visit our Privacy Policy for more information.
Got It! Thanks!Privacy policy