T-1 and T-3 Adapters allow fitting of Tinker & Rasor CP test stations on existing riser pipe of varying sizes.Available Sizes

• T-3 Adapter, 3″ pipe to 2″ pipe
• T-3 Adapter, 3″ pipe to 1″ pipe
• T-1 Adapter, 1″ pipe to 3/4″ pipe

The Tinker & Rasor Shock Guard fits the Model T-3 “Top Hat” test station. The Shock Guard fits on one side of the test station terminal, keeping field personnel and others away from wire connections. The Tinker & Rasor Shock Guard minimizes the risk of electrocution, and meets NACE Standard SP-01-77/4.4.4 when used with non-metallic Tinker & Rasor Banana Plugs.

The Tinker & Rasor Model T-3 Test Station comes with standard rapid wire connection Binding Posts. Other terminal connectors are available,Available Terminal Connectors

• Standard Binding Posts
• Non-metallic Banana Plugs
• 18-8 Stainless Steel 1/4 x 20
• Non-metallic 5-way Binding posts
• and many more…

“Anti-Spin” Gaskets”Anti-Spin” Gaskets are available for all Tinker & Rasor Test Station models. The “Anti-Spin” gasket does just that, it keeps the terminal from spinning on the riser pipe. This prevents the test station from spinning or sliding off the riser and allows superior tightening of the terminal nut.

Custom ConfigurationsThe Model T-3 comes in many standard and custom configurations. For example, nickel-plated brass Bonding Straps are available.

Flange AdapterThe T-3 Flange Adapter allows for easy placement of T-3 Test Stations to pipe flanges, walls, wooden posts, and other areas where the installation of riser pipe is inconvenient.

Shunts

Available in three sizes

Available Shunts Orange 0.001 Ohm 25 Amp capacity Yellow 0.01 Ohm 8 Amp capacity Red 0.1 Ohm 2 Amp capacity